HP UX SNAplus2 manual SNAplus2 Domain Window

Administering SNAplus2

Using the Motif Administration Program

Figure 3-1 SNAplus2 Domain Window

	If any active nodes in the domain (nodes on which SNAplus2 is running)
	are not configured, SNAplus2 prompts you to configure the node.
	The Domain window does not list SNAplus2 clients. Clients use the
NOTE
	resources of SNAplus2 servers (SNA nodes) to access SNA resources.
	You can perform any of the following administration tasks from the
	Domain window:
	Start or stop any node in the domain
	Select the line for the node and click on the Start or
	Stop button on this window. (Alternatively, you can
	click on the line for the node, then select Start node
	or Stop node from the Selection menu.)
	Administer a specific node
	Double-click on the line for that node on the Domain
	window. (Alternatively, you can click on the line for the
	node, then click on the Zoom button or select
	Properties from the Selection menu. You can also
	select the window for the node from the Windows
	menu.)

118 Chapter 3