HP UX SNAplus2 manual Configuring 3270 Sessions, Session Configuration Parameters, Session name

Configuring User Applications

Configuring 3270 Users and Sessions

The user can view RTM data.

Send alerts

The user can send alerts to NetView.

Additional Configuration

After performing the emulation user configuration, you can define 3270 sessions for users or groups as described in “Configuring 3270 Sessions”.

Configuring 3270 Sessions

A 3270 session definition must be added as the child of an emulator user or group definition. You can configure a single 3270 session to use a display or printer LU, or assign it an LU pool (enabling it to use any available LU in the pool). You can also configure several 3270 display sessions that use the same LU pool, in a single operation.

Emulator session information can be accessed by the SNAplus2 3270 emulator program

To configure 3270 sessions, use one of the following methods:

Motif administration program

Select Emulator users and sessions from the Windows menu on the Node window, then choose New.

Command-line administration program

Issue the following command: define_emulator_user

	3270 Session Configuration Parameters
	You can configure a single session or multiple sessions for 3270
	emulation:
	• To configure a single session, supply the following information:
	Session name
	A name to identify the session.
	The SNAplus2 HP-UX 3270 emulation program uses sessions with
NOTE
	names in the range SESS0001–SESS0010. To define a session that is
	initially available to the user, choose a name in this range. If the user has
	remap permission, you can define a session to which the user can remap,
	choosing a name that is not in that range (for example, SESS0011).

216 Chapter 8