HP UX SNAplus2 manual 350

Configuring an Invokable TP Using snaptpinstall

File Format for snaptpinstall

If the LU alias is specified for an automatically started TP, the TP must use the extended form of the RECEIVE_ALLOCATE verb and specify this LU alias as a parameter to the verb. This enables SNAplus2 to route the incoming Attach to the correct TP. For more information about the different forms of RECEIVE_ALLOCATE, refer to HP-UX SNAplus2 APPC Programmers Guide. If you need to permit the TP to determine the correct LU alias at run-time rather than building it into the application, you can do this by setting an environment variable to contain the appropriate LU alias (using the ENV parameter), and designing the application to read this environment variable in order to determine how to issue

RECEIVE_ALLOCATE.

This line is optional; if it is not included, the default is to accept incoming Attaches from any local LU.

ENV

Specify any environment variables required by the TP. Each variable is specified in the form environment_variable=value on a separate ENV line. Up to 64 ENV lines can be included; the variables are set in the same order as they appear here.

The string environment_variable=value must not contain space or tab characters before or after the = character.

For Windows SHOW

Specify how the application should be displayed when it is started. This parameter is passed to the application, and not processed by SNAplus2; it is the application's responsibility to interpret it and act on it. You can enter any of the following values:

MAXIMIZED

The application is maximized.

MINIMIZED

The application is minimized.

HIDDEN

The application does not appear on the screen.

NORMAL

350 Appendix C