Introduction to SNAplus2

SNAplus2 Components

End of Section

Windows Clients

For Windows SNAplus2 enables machines running Microsoft Windows 3.1, Windows for Workgroups 3.11, Windows 95, Windows NT, and OS/2 to act as clients in the SNAplus2 domain. You can run either a 16-bit version of the SNAplus2 client software (referred to in this guide as “Win16”) or a

32-bit version (referred to in this guide as “Win32”):

•The 16-bit version can be installed on machines running Windows 3.1 or Windows for Workgroups 3.11, or on Win16 subsystems on Windows NT, Windows 95, or OS/2. SNA network information, and other configuration information required by Win16 clients, is held in the sna.ini file.

•The 32-bit version can be installed on machines running Windows 95 or Windows NT. Configuration information required by Win32 clients is managed through the Windows Program Registry.

For more information about the sna.ini file and the Windows Program Registry, and about managing Windows clients, see Chapter 11, “Managing SNAplus2 Clients.” For information about Windows SNA APIs, see “Windows APIs”, or refer to the documentation provided with Microsoft SNA Server.

End of Section

Chapter 2

89