HP UX SNAplus2 Your, Value, NETID, IDBLK, IDNUM, EXCHID, SSCPNAME, Motif Field, Remote node, Local node ID, Implementation, Remote node ID, Remote node type

Configuration Planning Worksheets

Connectivity Worksheets

		Your
Motif Field	Valid Entry/Notes	Implementation
		Value
Remote node	NETNAME.CPNAME (each 1–8 type
	A EBCDIC characters; optional)
	If the remote system is a VTAM host,
	you can find the network name (the
	first eight characters of the fully
	qualified name) in the NETID
	parameter of the VTAM Start
	command. The last eight characters
	are in the SSCPNAME parameter of
	the VTAM Start command.
Remote node type	Discover
	Network node
	End or LEN node
Dependent LU traffic
Remote node role	Host
	Downstream (DLUR)
Local node ID	8 hexadecimal digits (defaults to node
	name)
	In a VTAM configuration, the first
	three digits should match the IDBLK
	parameter in the PU definition, and
	the last five should match the
	IDNUM parameter.
	On an AS/400 system, the node ID is
	configured in the EXCHID
	parameter.
Remote node ID	8 hexadecimal digits (optional)
Downstream PU name	1–8 type A EBCDIC characters
Upstream DLUS name	NETNAME.LUNAME (each 1–8 type
	A EBCDIC characters)
Contact information

320 Appendix A