Administering SNAplus2

Using the Motif Administration Program

When you select a node to be administered, SNAplus2 displays the Node window as shown in Figure 3-2, “Node Window.” (For a standalone system, SNAplus2 does not display the Domain window, because the domain has only one node. Instead, SNAplus2 immediately displays the Node window when you start the administration program.)

Add a node to the list of servers for the domain

Click on the line for the node and select Make configuration server from the Selection menu.

Remove the node from the list of servers for the domain

Click on the line for the node and select Remove configuration server from the Selection menu.

Configure logging for all nodes in the domain

Select Logging from the Diagnostics menu. Turn tracing for a specific node on or off

 

Click on the line for the node and select Tracing on

 

selected node from the Diagnostics menu.

 

Get information about domain resources

 

Choose any of the options on the Windows menu. In

 

addition to shared domain resources, the Windows

 

menu also lists each Node window in the domain.

 

If any servers in the local domain are running a back-level version of

NOTE

 

SNAplus2, those servers are listed in the Domain window, but they

 

cannot be configured or controlled with this version of the Motif

 

administration program. To administer resources on these servers, run

 

the appropriate version of the Motif administration tool installed on one

 

of the computers running the back-level version.

 

 

Node Window

A sample Node window is shown in Figure 3-2, “Node Window.” The title bar shows the name of the system.

Chapter 3

119