Managing SNAplus2 Clients

Managing Win32 Clients

The group_name value indicates the group name of the SNAplus2 user on this client. This name must match the SNAplus2 configuration on servers, as follows:

•If the client will be running 3270 or 5250 emulation, and you have set up the SNAplus2 configuration to include emulator records for groups of users rather than an individual record for each user, this name must match the name of an emulator user record that is defined for use by a group of users. Emulator user records are defined using the define_emulator_user command; for more information, see “Configuring 3270 Emulator Users” or “Configuring 5250 Emulator Users”.

•If you have not set up emulator user records for groups of users, this line of the file is optional. If neither the user name nor the group name is specified, 3270 or 5250 users on the client can use the <DEFAULT> user record, if any, in the domain configuration file.

•If the client will not be running 3270 or 5250 emulation, this line of the file is not required.

invoked_tps

The Registry data type of this value is REG_SZ.

Specify one of the following values:

YES

This client is used to run invoked TPs (APPC TPs that issue RECEIVE_ALLOCATE, or CPI-C applications that issue Accept_Conversation or Accept_Incoming). In this case, you may also need to define the TP on this client. For more information, see “Defining TPs” or Appendix C, “Configuring an Invokable TP Using snaptpinstall.”

NO

This client is not used to run invoked TPs.

This line is optional. If it is not specified, the default is NO.

lan_access_timeout

The Registry data type of this value is REG_SZ.

Chapter 11

259