HP UX SNAplus2 manual Configuration, Domain, Snagroup

	Managing SNAplus2 Clients
	Managing Win32 Clients
	rui = YES NO
	nof = YES NO
	ms = YES NO
	MSG_tracing
	file1 = msg_trace_filename_1
	file2 = msg_trace_filename_2
	flip_size = filesize
	truncation_length = length
	fmi = YES NO
	CS_tracing
	file1 = cs_trace_filename_1
	file2 = cs_trace_filename_2
	flip_size = filesize
	admin_msg = YES NO
	datagram = YES NO
	data = YES NO
	send = YES NO
	receive = YES NO
	Appl_Name
	APPCTPN = tp_name
	APPCLLU = lu_name
	CSV_data
	CSVTBLG = table_G_filename
	The domain = domain_name value is the only required value in the
NOTE
	Registry.
	The following sections explain the contents of the file. Where a
	parameter in the file takes the values YES or NO, any string beginning
	with Y or y is interpreted as YES, and any string beginning with N or n is
	interpreted as NO.
	Configuration
	The Configuration subkey contains configuration information for the
	client, as follows:
	domain
	The Registry data type of this value is REG_SZ.
	The domain_name value indicates the domain name of
	the SNAplus2 LAN, as specified during the client
	installation. This line is required.
	snagroup
	The Registry data type of this value is REG_SZ.

258 Chapter 11