Managing SNAplus2 from NetView

Overview

Overview

SNAplus2 includes a remote command facility (RCF) that operates in conjunction with the NetView program at a host computer, enabling a NetView operator to issue commands from the host NetView program to the SNAplus2 computer. For a brief overview of NetView and RCF commands, see “Using the Host NetView Program”.

The SNAplus2 RCF provides the following two functions:

•Service point command facility (SPCF) enables a NetView operator to issue SNAplus2 administration commands from NetView using the same syntax as for the command-line administration program snapadmin. This facility is described in “Using SPCF”.

•UNIX command facility (UCF) enables a NetView operator to issue HP-UX operating system commands from NetView. This facility is described in “Using UCF”.

Both of these functions can be accessed from the NetView console in the same way, and the overall syntax for issuing the commands is the same.

236

Chapter 10