![](/images/new-backgrounds/1110468/110468423x1.webp)
CLI Commands
set
set (router) login prompt
Use the set (router) login prompt command to enable/disable the login prompt on the specified Router card.
Syntax: set
Example: set 1 login prompt enable
The example will set the Router card to require a login with Telnets from the
Controller.
The slot number
{controllerlocalradius}
disable | Disable the login prompt |
enable | Enable the login prompt |
|
|
set (router) ntp
Use the set (router) ntp command to setup Network Time Protocol (NTP) parameters.
Note: not operational in this release.
set (router) ntp enable/disable
Use the set (router) ntp enable/disable command to enable/disable NTP processing.
Syntax: set
Example: set 1 ntp enable
The example will enable NTP processing on the Router card in slot 1.
The slot number
{disableenable} |
|
| |
| disable |
| Disable NTP processing |
| |||
|
|
|
|
| enable |
| Enable NTP processing |
|
|
|
|
|
|
|
|
|
|
Axxius 800 - Release 2.2 |