Carrier Access Axxius 800 user manual Set router-lan phy

CLI Commands

set

set (router-lan) phy

Use the set (router-lan) phy command to specify the Ethernet PHY (physical specifications) speed and mode.

NOTE: It is highly recommended that this setting be left at auto- negotiation. Connecting Ethernet devices with incompatible setting can lead to severe network performance degradation, increased collisions, late collisions, CRC errors, and undetected data corruption.

Syntax: set {rtr_lan-addr} phy {setting}

Example: set 3:1 phy full100

The example will force the Ethernet PHY to 100 MHz full-duplex on the Router in slot 3.

{rtr_lan-addr}

The Router address is in the form {slot:port} or {slot "profile-name"}.

slot		The slot number (1-8) that contains the Router card.
port		Port number of the Router.
"profile-name"		The profile name for the Router interface. Name must be enclosed
		in quotes, with a maximum length of 11 characters.
{setting}
auto	Auto-negotiate (highly recommended).
full10	10 MHz full-duplex.
full100	100 MHz full-duplex.
half10	10 MHz half-duplex.
half100	100 MHz half-duplex.

5-144 Axxius 800 - Release 2.2