Carrier Access Axxius 800 user manual Set lsprotect remove, Example set lsprotect 52 remove

CLI Commands

set

set lsprotect remove

Use the set lsprotect remove command to remove port from protected mode.

Syntax: set lsprotect {slot:port} remove

Example: set lsprotect 5:2 remove

Do you really want to do this? y

*-Protected port(s) not removed since they were not previously assigned.

Example: set lsprotect 5:2 remove

> set lsprotect 5:2 remove

Do you really want to do this? y

OK

{slot:port}

The {slot:port} address of the protected port to be configured.

slot	Slot number (1-8) where a Quad T1 card is located
port	Port number or range (1-4)

Axxius 800 - Release 2.2 5-95