Carrier Access Axxius 800 user manual Src-ip-addr/bits

CLI Commands

add

{src-ip-addr/bits}

The destination IP address and number of significant bits. The address "0.0.0.0/0" matches any address.

src-ip-addr	Enter the IP Address of the remote device or network that this rule
	will affect. If you enter the address of a remote device, this rule will
	affect only the session establishments of the remote device and the
	destination address entered in the dest-ip-addr/bits command above.
	The IP Address is in the form of xxx.xxx.xxx.xxx, where xxx is
	between 0-255.
bits	Use this field to identify the number of bits, from left to right that
	will be used to match the IP Address field within the data packet.
	Range is between 1-32.

Axxius 800 - Release 2.2 5-25