Carrier Access Axxius 800 user manual Setup of Adpcm, Set Up a V.35 Port

Configuration

Basic System Setup

Setup of ADPCM

Command

Description

Connect T1 cable to port 1 of the ADPCM service card

set {adpcm_card-addr}	Enable compressing by selecting Map type. Note:
{nonemap1map2map3}	none disables compression.
show (adpcm_card-addr}	Displays the status of the card, and the mapping.
connect 2:1:1-12 2:4:1-12	Set ADPCM cross-connects. The example
	connects all 24 channels of the ADPCM to the 12
	channels of the T1 (now compressed) on port 4.
	This example is with map2
show connect {2:1)	Displays the connections made above.

Set Up a V.35 Port

Use the following commands to set up a V.35 port.

Command	Description
set {v35-addr} cts	Set the Clear to Send operation mode. See set
{cdhighlowrts}	(v35) command for details.
set {v35-addr} data	Set the data mode. See set (v35) command for
{invertnormal}	details.
set {v35-addr} clock	Set the clock mode. See set (v35) command for
{sourceexternal}	details.
set {v35-addr} speed	Set the speed. See set (v35) command for details.
{56K64K}
set {v35-addr} txclkinv	Set the transmit clock inversion mode. See set
{invertnormal}	(v35) command for details.
set {v35-addr} rxclkinv	Set the receive clock inversion mode. See set
{invertnormal}	(v35) command for details.

Axxius 800 - Release 2.2 4-9