Carrier Access Axxius 800 user manual Pattern, Nnn chart

		CLI Commands
		set
	pattern	Syntax: set{v54-addr} v54 equipment pattern {n}
		Set V.54 test pattern n is from the following:
		0 = QRSS pattern (default)
		1 = 2047 pattern
		2 = 215 -1 pattern
		3 = 220 -1 pattern (QRSS with no bit stuffing)
	prepcnt	Syntax: set {v54-addr} v54 equipment prepcnt {nnn}
		Set V.54 Rx prep-pattern count {nnn}
		nnn = the number of times that the preparatory pattern must be
		received to be recognized.
network		Set the V.54 Network loop address.
	address	Syntax: set {v54-addr} v54 network address {nnn}
		Set the address of the port to {nnn}.
		{nnn} must be one of the following:
		1, 3, 5, 7, 9, 11, 13, 15,17, 19, 21, 23, 25, 27, 29, 31, 37, 39, 43, 45,
		47, 51, 53, 55, 59, 61, 63, 85, 87, 91, 95, 111, 119, 127, 255 (255
		disables). See chart below.
	disable	Syntax: set {v54-addr} v54 network disable
		Disable V.54 loop test
	enable	Syntax: set {v54-addr} v54 network enable
		Enable V.54 loop test
	prepcnt	Syntax: set {v54-addr} v54 network prepcnt {nnn}
		Sets the preparatory pattern response count.
		nnn = the number of times that the preparatory pattern must be
		received to be recognized.

[nnn] chart

0x01 - 1	0x0F - 15	0x1D - 29	0x33 - 51	0x57 - 87
0x03 - 3	0x11 - 17	0x1F - 31	0x35 - 53	0x5B - 91
0x05 - 5	0x13 - 19	0x25 - 37	0x37 - 55	0x5F - 95
0x07 - 7	0x15 - 21	0x27 - 39	0x3B - 59	0x6F - 111
0x09 - 9	0x17 - 23	0x2B - 43	0x3D - 61	0x77 - 119
0x0B - 11	0x19 - 25	0x2D - 45	0x3F - 63	0xFF - 255*
0x0D - 14	0x1B - 27	0x2F - 47	0x55 - 85

Axxius 800 - Release 2.2 5-173