Carrier Access Axxius 800 Set router-lan stp port cost, Set router-lan stp port priority

CLI Commands

set

set (router-lan) stp port cost

Use the set (router-lan) stp port cost command to configure Spanning Tree path cost value for this bridge port.

Syntax: set {rtr_lan-addr} stp port cost {port-cost-value}

Example: set 3:1 stp port cost 100

Sets the Spanning Tree port cost value at 100, on the Router in slot 3.

{rtr_lan-addr}

The Router address is in the form {slot:port} or {slot "profile-name"}.

slot	Slot number (1-8) that contains the Router card.
port	Port number of the Router.
"profile-name"	The profile name for the Router interface. Name must be enclosed
	in quotes, with a maximum length of 11 characters.

{port-cost-value}

The value can range from 1 to 65535, higher values represent slower data paths. For a 100 Mb LAN a value of 19 is recommended. For a 10 Mb LAN a value of 100 is recommended.

set (router-lan) stp port priority

Use the set (router-lan) stp port priority command to configure Spanning Tree priority value for this bridge port.

Syntax: set {rtr_lan-addr} port priority {port-priority-value}

Example: set 3:1 stp port priority 128

The example will set the STP port priority to 128, on the Router in slot 3.

{rtr_lan-addr}

The Router address is in the form {slot:port} or {slot "profile-name"}.

slot	Slot number (1-8) that contains the Router card.
port	Port number of the Router.
"profile-name"	The profile name for the Router interface. Name must be enclosed
	in quotes, with a maximum length of 11 characters.

{port-priority-value}

Spanning Tree port priority for this bridge port. Range from 0 to 255, with a default of 128.

5-148 Axxius 800 - Release 2.2