![](/images/new-backgrounds/1110468/110468217x1.webp)
CLI Commands
add
add (router) dns proxy
Use the add (router) dns proxy command to enable DNS proxy and add a remote DNS server address to the specified Router card.
Syntax: add
Example: add 2 dns proxy "Domain1" 192.168.100.245 "Texas"
Example will add a DNS proxy server "Domain1" with address 192.168.100.245 to the WAN named "Texas" on the TSR in slot 2.
The slot number
{"domain-name"}
The domain name for the external DNS server. Name must be enclosed in quotes, with a maximum length of 42 characters.
{ip-addr}
The IP address of the external DNS server, in the form of xxx.xxx.xxx.xxx, where xxx is between
{"profile-name"}
The profile name for the Router interface that is used to reach this destination. Name must be enclosed in quotes, with a maximum length of 11 characters.
add (router) remote
Use the add (router) remote command to add a remote WAN profile to the WAN profile table on the specified Router card.
Syntax: add
Example: add 6 remote "Texas"
The example will add a remote WAN named "Texas" to the WAN profile table for the TSR in slot 6.
The slot number
The name of the remote WAN profile to add with a maximum length of 11 characters. This name must be enclosed in quotes.
|
|
|
|
Axxius 800 - Release 2.2 |