Carrier Access Axxius 800 user manual Set Up a DS0/Channel, Set Up a DS1/T1

Configuration

Basic System Setup

Set Up a DS0/Channel

Use the following commands to set up a DS0.

Command	Description
set {ds0-addr} type	Set the channel type. See set (ds0) command
{datavoice}	for details.
set {ds0-addr} signal	Set the signaling option for the channel. See
{lsgsemwemdwemiemicpd}	set (ds0) command for details.

Set Up a DS1/T1

Use the following commands to set up a DS1/T1. See the set (ds1) command for more details.

Command	Description
set {ds1-addr} up	Activate the port.
set {ds1-addr} fdl	Set the Facilities Data Link (FDL)
{nonet1403}	capabilities.
set {ds1-addr} framing	Set the framing option for the DS1.
{d4 esf}
set {ds1-addr} id	Set the circuit identification name for the
{"id-name"}	DS1.
set {ds1-addr} lbo {1-8}	Set the line buildout value for the DS1.
set {ds1-addr} linecode	Set the linecode for the DS1.
{amib8zs}
set {ds1-addr} loopdetect	Set the detection/reaction to CSU
{onoff}	loopcodes.
set {ds1-addr} threshold	Set default thresholds for the DS1.
{daymin15} {bescssdmes
lcvlespcvsefssesuas)

4-6 Axxius 800 - Release 2.2