![](/images/new-backgrounds/1110468/110468453x1.webp)
CLI Commands
set
set (router) ppp security
Use the set (router) ppp security command to set up the local external security server, that the Router will use to authenticate remote PPP devices.
set (router) ppp security address
Syntax: set
Example: set 5 ppp security address 10.1.1.1
The example will set external security server address to 10.1.1.1, for the Router in slot 5.
Note: A set (router) ppp security server command must be completed before this command can be implemented.
The slot number
{ip-addr}
The IP address, in the form of xxx.xxx.xxx.xxx, where xxx is between
set (router) ppp security password
Syntax: set
Example: set 5 ppp security password "public"
The example will set the password to a local external security server to "public", for the Router in slot 5.
Note: A set (router) ppp auth by remote protocol command must be completed before this command can be set.
The slot number
{"password"}
A password with a maximum of 15 characters. Password must be enclosed in quotes.
|
|
|
|
Axxius 800 - Release 2.2 |