![](/images/new-backgrounds/1110468/110468419x1.webp)
CLI Commands
set
set (router) enhanced security
Use the set (router) enhanced security command to enable or disable enhanced login security on the TSR. When enabled the user will not receive any login prompt or other output until the security password is typed. The security password is set via the set (router) password command.
Syntax: set
Example: set 5 enhanced security enable
The example will enable the enhanced security on the Router card in slot 5.
Note: A set 5 password security "password" command must be completed before the enhanced security can be enabled.
See, set (router) password on page
The slot number
{disableenable}
disable | Disable enhanced login security |
enable | Enable enhanced login security |
|
|
set (router) lmi
Use the set (router) lmi command to specify the Local Management Interface (LMI) protocol to use for the specified Router card.
Syntax: set
Example: set 5 lmi annexd
The example will configure LMI on the Router card in slot 5 to
Annex D.
The slot number
{annexddisablelmi}
annexd | Set LMI to Annex D. |
disable | Disable LMI on the TSR. |
|
|
lmi | Set LMI to LMI rev1 (DLCI 1023) |
|
|
|
|
|
|
|
|
Axxius 800 - Release 2.2 |