Carrier Access Axxius 800 user manual Set router dhcp disable, Set router dhcp relay server

CLI Commands

set

set (router) dhcp

Use the set (router) dhcp commands to configure the DHCP functions.

set (router) dhcp disable

Use the set (router) dhcp disable command to disable both DHCP server and DHCP relay functionality for the specified Router card.

Syntax: set {rtr_card-addr} dhcp disable

Example: set 3 dhcp disable

The example will set the Router in slot 3 to disable DHCP.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

set (router) dhcp relay server

Use the set (router) dhcp relay server command to enable a DHCP relay and assign a DHCP server address for the specified Router card.

Syntax: set {rtr_card-addr} dhcp relay server {server-number} {ip-addr} {"profile-name"}

Example: set 3 dhcp relay server 1 134.200.3.45 "remotewan"

The example will set the TSR in slot 3 to enable DHCP relay server 1 at IP address 134.200.3.45 on WAN "remotewan".

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{server-number}

The server number (1 or 2) to specify.

{ip-addr}

The IP address of the server to relay to, in the form of xxx.xxx.xxx.xxx, where xxx is between 0-255.

{"profile-name"}

The profile name for the Router interface that is used to reach this destination. This name must be enclosed in quotes.

Axxius 800 - Release 2.2 5-103