Carrier Access Axxius 800 Add router-lan secondary ip address, Ip-addr maskip-addr/bits, Mask

CLI Commands

add

add (router-lan) secondary ip address

Use the add (router-lan) secondary ip address command to add a secondary IP address and subnet to the specified LAN interface. The Router will then be capable of routing between the various subnets on the LAN interface or between any of the LAN subnets and any WAN subnet. A maximum of 8 secondary IP addresses can be added to the LAN interface.

Syntax: add {rtr_lan-addr} secondary ip address {ip-addr [mask]ip-addr/bits}

Example: add 4:1 secondary ip address 192.168.1.1 255.255.255.0

The example will add a secondary IP address of 192.168.1.1 and a subnet mask of 255.255.255.0.

To view the secondary IP addresses, use the show 4:1 command

{rtr_lan-addr}

The Router address is in the form {slot:port} or {slot "profile-name"}.

	slot		The slot number (1-8) that contains the Router card.
	port		Port number of the Router.
	"profile-name"		The profile name for the Router interface. Name must be enclosed
			in quotes, with a maximum length of 11 characters.
{ip-addr [mask]ip-addr/bits}
	ip-addr	The IP address of the Host to query, in the form of xxx.xxx.xxx.xxx,
		where xxx is between 0-255.
	mask	The mask of the secondary IP address, in the form of
		xxx.xxx.xxx.xxx, where xxx is between 0-255.
	bits	The subnet mask, specified as the number of ones bits in the mask
		value. Range is between 1-32.

5-18 Axxius 800 - Release 2.2