![](/images/new-backgrounds/1110468/110468467x1.webp)
CLI Commands
set
set (router) stp
Use the set (router) stp commands to configure the Spanning Tree Protocol on the Router. Note: Enter {slot} only, if {slot:port} is entered the command will be directed to the Router LAN and not the Router Card.
set (router) stp bridge forwarddelay
Use the set (router) stp bridge forwarddelay command to configure Spanning Tree bridge forward delay value for the bridge. The bridge forward delay is the time spent by a Port in the Listening or Learning States before the transitioning to the Learning or Forwarding State, respectively.
Syntax: set
Example: set 3 stp bridge forwarddelay 15
The example will set the Spanning Tree bridge forward delay time to 15 seconds, on the Router in slot 3.
The slot number
{value}
The value can range from 4 to 30 seconds, with a default of 15.
set (router) stp bridge hellotime
Use the set (router) stp bridge hellotime command to configure Spanning Tree bridge hello time value for the bridge.
Syntax: set
Example: set 3 stp bridge hellotime 3
The example will set the Spanning Tree bridge hello time to 3 seconds, on the Router in slot 3.
The slot number
{value}
The value can range from 1 to 10 seconds, with a default of 2.
|
|
|
|
|
|
Axxius 800 - Release 2.2 |