Carrier Access Axxius 800 user manual Add router dhcp server option, Settings

CLI Commands

add

add (router) dhcp server option

Use the add (router) dhcp server option command to add optional DHCP server attributes that will be advertised every time a DHCP client discovery is initiated. This provisioning takes effect immediately and can only be performed when the DHCP server is enabled.

Syntax: add {rtr_card-addr} dhcp server option {tag} {setting}

Example: add 2 dhcp server option 19 false add 2 dhcp server option 13 byte1 200 add 2 dhcp server option 160 byte2 3200

add 2 dhcp server option 170 byte4 0xFEDCBA98

add 2 dhcp server option 12 "www.carrieraccess.com" add 2 dhcp server option 150 192.168.0.33

add 2 dhcp server option 150 192.168.0.33 10.40.1.1 20.0.0.1 100.150.3.97

{rtr_card-addr} - The slot number (1-8) that contains the Router (TSR) card.

{tag} - Range is 1-254. Options tags are unique, duplicate numbers will be rejected. To change an option with the same tag, the old option must be deleted and then the new option re-entered. 0 = off. Reserved numbers 6, 15, 44, 46, 47, 50, 51, 53, 54, 61.

{settings}
	{true/false}	Boolean uses true or false
	{byte1byte2byte4} {value}	byte1 = send value in 1 byte
		byte2 = send value in 2 bytes
		byte3 = send value in 4 bytes
		value = any numeric value.
	{"string"}	Unidentified with a maximum of 50
		characters, enclosed in quotes.
	{ip-addr} [ip-addr] [ip-addr]	IP address in the form xxx.xxx.xxx.xxx,
	[ip-addr]	where xxx is a number from 0 to 255.

5-8 Axxius 800 - Release 2.2