Carrier Access Axxius 800 user manual Set router lmi poll, Set router login auth, Counterinterval

CLI Commands

set

set (router) lmi poll

Use the set (router) lmi poll command to specify the Local Management Interface (LMI) for the specified Router card.

Syntax: set {rtr_card-addr} lmi poll {counterinterval} {value}

Example: set 5 lmi poll counter 15

The example will configure LMI poll count to 15, on the Router card in slot 5.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{counterinterval}

counter	Set the LMI count. {value} = count of how many link status enquiries can
	go un-responded before the link is declared down. Range is 0-255.
interval	Set LMI period {value} = LMI period. Range is between 0-255 seconds.

set (router) login auth

Use the set (router) login auth command to specify how login authentication for this router should be performed. The router supports a configuration setting for each router card to determine how the router card logins are to be authenticated, as per one of the following choices: authenticate router logins from the router card local database (default), or authenticate router logins identically to Controller logins. The last choice will cause the router logins to be authenticated via the Controller’s database of users and passwords, as configured for the Controller.

Syntax: set {rtr_card-addr} login auth {controllerlocalradius}

Example: set 1 login auth controller

The example will set the TSR card in slot 1 to use the same login setting as the Controller.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{controllerlocalradius}

controller	Use the Controller’s login auth setting
local	Authenticate logins locally
radius	Authenticate logins with RADIUS server

Axxius 800 - Release 2.2 5-111