![](/images/new-backgrounds/1110468/110468553x1.webp)
CLI Commands
show
show autoexit
Use the show autoexit command to display whether autoexit is on or off. If on, the
Syntax: show autoexit
Example: > show autoexit
Autoexit is off.
show (bri)
Use the show (bri) command to display settings for BRIs.
Syntax: show {bri-addr}
Example: > show 5:1
The example will display the settings for port 1 (BRI) on slot 5.
SLOT 5: |
|
|
|
Settings for BRI Port 1: |
|
|
|
Mode: | LT3DS0 |
|
|
Up/Down: | UP |
|
|
CRV: | 0 |
|
|
Performance Sync Source: | AXXIUS |
|
|
Auto Activate: | OFF |
|
|
Performance Threshold Settings |
| 1 hour | 1 day |
|
| ||
errored seconds: |
| 40 | 100 |
severely errored seconds: | 10 | 25 |
|
{bri-addr}
The BRI address is in the form {slotslot:port}. Where {slot} displays information for all ports on the card, {slot:port} for only the defined port.
slot | Slot number |
port | Port number, range or all. |
|
|
|
|
|
|
Axxius 800 - Release 2.2 |