![](/images/new-backgrounds/1110468/110468179x1.webp)
Configuration
Setup of DS0 Management Channel
Add and Enable all Remote Axxius Needed
Telnet into the TSR card
1.From the CLI execute a Telnet command to the TSR card. Telnet {slot}
Example: telnet 1
The example will Telnet into the router located in slot 1.
2.Enter password (default is "admin") and select [ENTER].
3.Select Terminal Emulation (scroll with [TAB]) and select [ENTER].
Once you are in the router, the [TAB] key will move you through the menus and the [SPACEBAR] will scroll you through selections in < >.
|
|
|
|
|
|
Axxius 800 - Release 2.2 |