Carrier Access Axxius 800 user manual Bits Clock 1/BITS Clock

Electrical Installation and Cabling

Chassis Connections

BITS Clock 1/BITS Clock 2

The external alarm connectors are three-pin wire-wrap connectors. One for each, Tip (T), Ring (R) and Shield (S). Tip and Ring are the two connections for the 100 ohm differential signal to the box. Shield is for grounding the shield of the clock cable to the Axxius. If the customer is not using shielded cable, then only the Tip and Ring is connected.

Bits Clock 1 and 2

back of Axxius

Axxius 800 - Release 2.2 3-11