Troubleshooting
The Troubleshooting Guide lists some possible machine problems, causes and corrections. Also see Section II "Troubleshooting", pages 15 and 16 for taping head problems.
Note
Troubleshooting Guide |
|
|
|
Problem | Cause | Correction | |
|
|
|
|
Drive belts do not convey boxes | Worn drive belts | Replace drive belts | |
| Top taping head does not apply | Adjust the box height adjustment | |
| enough pressure | with the crank | |
| Taping head applying spring | Replace spring holder | |
| holder missing |
|
|
| Taping head applying spring set | Reduce spring pressure | |
| too high |
|
|
|
|
|
|
Drive belts do not turn | Worn or missing friction rings | Replace friction rings | |
| Drive belt tension too low | Adjust belt tension | |
| Electrical disconnect | Check power and electrical plug | |
| Circuit breaker not at correct | Set to correct current value | |
| setting |
|
|
| Motor not turning | Evaluate problem and correct | |
|
|
| |
Drive belts break | Worn belt | Replace belt | |
|
|
| |
Squeaking noise as boxes pass | Dry compression bearings | Lubricate compression bearings | |
through machine | Dry column bearings | Lubricate column bearings | |
| |||
|
|
| |
Tape not centered on box seam | Centering guides not centered | Adjust centering guides | |
| Box flaps not of equal length | Check box specifications | |
|
|
|
|
(Continued)
37
