7
Specifications
(continued)
1. Power Requirements:
Electrical – 115 VAC, 60 Hz, 3.8 Amp (440 watts)
Pneumatic – 6.5 bar gauge pressure [95 PSIG], 2.5 SCFM
75 liter/minute @ 21° C., 1.01 bar maximum at maximum cycle rate.
A pressure regulator/filter is included.
The machine is equipped with two 1/6 HP gearmotors and comes with an 2.4 m [8 foot] standard neoprene
covered power cord and a grounded plug. Contact your 3M Representative for power requirements not listed
above.
2. Operating Rate:
Note: Machine is shipped with both cams (A and B) installed. To obtain production rate shown
with dotted line (cam A only), cam B must be removed. See "Adjustments – Gate Operation",
page 29.