3M 800af manual Permissible Lift Area Label

Important Safeguards (Continued)

The "Lifting Notice" label, shown in Figure 1-12, is attached to the left side of the machine frame close to the air pressure regulator. This label reminds service personnel of the center-of-gravity and weight of the machine if machine must be lifted and moved.

Figure 1-12 – Lifting Notice Label

Two "Permissible Lift Area" labels shown in Figure 1-13, are attached, two on each side of machine, at the lower edge of the frame. These labels remind service personnel where to place forks if machine is lifted and moved with forklift truck.

Figure 1-13 – Permissible Lift Area Label

The "Up/Down/Lock" and "In/Out" labels shown in Figure 1-14,are attached next to the corresponding height and width adjustment cranks. These labels remind operators of direction to turn adjustment cranks to match box height/width.

Figure 1-14 – Up/Down/Lock and In/Out Labels

The "Tape Threading" label, shown in Figure 1-15, is attached to the lower frame, at the infeed end. This label is a quick reference for tape threading when lower tape roll is mounted in outboard position.

Figure 1-15 – Tape Threading Label

6