Carrier Access Axxius 800 user manual Clear ds1, Setting

CLI Commands

clear

clear (ds1)

Use the clear (ds1) command to clear specified DS1 performance data.

Syntax: clear {ds1-addr} performance {setting}

Example: clear a:1 performance all

Clears all performance data on DS1 1 (port 1) on the DS1 Controller card.

{ds1-addr}

The Controller DS1 addresses are different on the DS3 and DS1 Controller, however the DS1 address on the services cards does not change with Controller type (DS3 or DS1).

DS1 Address on a DS3 Controller in the form {slot:port:channel}

slot	A for the DS3 Controller card.
port	Port number, range or all.
ds1 channel	Channel number, range or all.

DS1 Address on a DS1 Controller (DS1 mode) or service cards (with DS1 or DS3 controller) in the form {slot:port}

		slot		A for the DS1 Controller card (DS1 mode), or 1-8 for service cards.
		port		Port number, range or all.
{setting}
	all		Clear all performance data
	bes		Clear bes (bursty errored seconds) performance data.
	css		Clear css (controlled slip seconds) performance data.
	dm		Clear dm (degraded minutes) performance data.
	es		Clear es (errored seconds) performance data.
	lcv		Clear lcv (line code violations) performance data.
	les		Clear les (line errored seconds) performance data.
	pcv		Clear pcv (path code violations) performance data.
	sefs		Clear sefs (severely errored frame seconds) performance data.
	ses		Clear ses (severely errored seconds) performance data.
	uas		Clear uas (unavailable seconds) performance data.

Axxius 800 - Release 2.2 5-35