Carrier Access Axxius 800 user manual Set router-lan ipx network, Ethii

CLI Commands

set

set (router-lan) ipx network

Use the set (router-lan) ipx network command to specify IPX network numbers for the four IPX LAN frame types. This enables the Axxius to Router IPX to Remote (WAN) networks, even if an IPX server does not exist on the local LAN. Typically, the Axxius will learn its external network number. However, if the local LAN does not have a server or if the IPX RIP setting is set to <Neither>, and you wish to Router IPX to Remote (WAN) networks, the external network number must be defined.

Syntax: set {rtr_lan-addr} ipx network {ieee8022ieee8023ethiisnap} {network}

Example: set 3:1 ipx network ieee8022 000000fl

The example will set the local LAN interface on slot 3 to IP address 192.168.202.244, with a subnet mask of 255.255.255.0.

{rtr_lan-addr}

The Router address is in the form {slot:port} or {slot "profile-name"}.

	slot		The slot number (1-8) that contains the Router card.
	port		Port number of the Router.
	"profile-name"		The profile name for the Router interface. Name must be enclosed
			in quotes, with a maximum length of 11 characters.
{ieee8022ieee8023ethiisnap}
	ethii	Ethernet II framing
	ieee8022	IEEE 802.2 framing
	ieee8023	IEEE 802.3 framing
	snap	LLC/SNAP framing

{network}

External IPX network, specified as an 8-digit hexadecimal number.

Axxius 800 - Release 2.2 5-143