![](/images/new-backgrounds/1110468/110468385x1.webp)
CLI Commands
set
set lsprotect enable/disable
Use the set lsprotect enable/disable command to set the global enable or disable the Low Speed Protection options on the system.
Syntax: set lsprotect {disableenable}
Example: set lsprotect disable
{disableenable}
disable | disable Low Speed Protection on the Axxius system |
enable | enable Low Speed Protection on the Axxius system |
|
|
set lsprotect manual
Use the set lsprotect manual command to set manual mode control for protected ports. Note: this command is effective only if lsprotect is enabled (set lsprotect enable).
Syntax: set lsprotect {slot:port} manual {disableenablereleaseswitchbackswitchover} [hold]
Example: set lsprotect 5:1 manual enable
{slot:port}
The {slot:port} address of the protected port to be configured.
| slot |
| Slot number |
| port |
| Port number or range |
{disableenablereleaseswitchbackswitchover} | |||
| disable |
| Disables protection for protected port(s) |
| |||
|
|
|
|
| enable |
| Enables protection for protected port(s) that have been automatically or |
|
|
| manually disabled. |
|
|
|
|
| release |
| Releases manual hold for protected port(s). |
|
|
|
|
| switchback |
| Switches protected port(s) back to home circuit(s). |
|
|
|
|
|
|
| [hold] Holds manual switchbacks |
|
|
|
|
| switchover |
| Manually switches protected ports to backup circuit(s). |
|
|
|
|
|
|
| [hold] Holds manual switchbacks |
|
|
|
|
|
|
|
|
Axxius 800 - Release 2.2 |