Carrier Access Axxius 800 user manual Set key, Set login auth, Key-code, Localradius

CLI Commands

set

set key

Use the set key command to enable a specific keyed feature. To acquire a feature key code, contact Carrier Access Customer Service. Currently, keyed features (if available) can be enabled on a Controller or a Router.

Syntax: set [rtr_card-addr] key {"key-code"}

Example: set 4 key "q0B8yma2IsSL+1BarY0u"

[rtr_card-addr]

The slot number (1-8) that contains the Router card. This optional parameter is used for router specific keyed features. If a slot is not entered, key is directed to the Controller.

{"key-code"}

The key code is entered to enable the specific feature.

set login auth

Use the set login auth command to set the authentication method for controller logins, with local database or external RADIUS server. When set to RADIUS the controller will try the configured RADIUS servers first. If none of the configured RADIUS server reply to the request, the controller will use its local database of users to authenticate the login. An attempt set login authentication to RADIUS will fail if there is not at least 1 RADIUS server configured.

Syntax: set login auth {localradius}

Example: set login auth radius

The example will set the login authentication process to RADIUS.

{localradius}

local	Authenticate user logins via the controller database. Default.
radius	Authenticate user logins via the external RADIUS servers.

Axxius 800 - Release 2.2 5-91