Citrix Systems 9000 Series Configuring the SSL VPN Client

SSL VPN User’s Guide 4-1

Chapter 4

Configuring the SSL VPN Client

The client supports a minimal set of configuration tasks, based on the policies

configured on the gateway. The following chapter covers all the tasks that you

can perform on the client.

You can configure several login-related settings such as the login mode, gate-

way, proxy server, etc. Some of these configurations are possible only on the

agent. This section covers all the login-related settings that can be configured

on the client.

Once installed on your computer, you can use the agent to directly log on to

the SSL VPN gateway. This is also known as Native Login. To use this function-

ality, you first need to initialize the agent and then access it from the Windows

system tray. The following procedure lists the steps to activate the client and

then use it to log on to the SSL VPN gateway.

Note This mode is restricted to the agent and is not available via the plug-in.

1. Check the Windows system tray for the icon. This indicates that the

agent is idle and that you are currently logged out. If the icon is absent,

click Start > Programs > Citrix Access Gateway Enterprise Edition >

Launch SSL VPN client. The icon is displayed in the system tray.

2. Right-click the icon and select Login from the short-cut menu. The Citrix

Access Gateway Enterprise Edition dialog box is displayed as shown in the

following figure.