Citrix Systems 9000 Series

MENT MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS

OR USED TO MAKE DERIVATIVE WORK (SUCH AS TRANSLATION, TRANSFORMA-

TION, OR ADAPTATION) WITHOUT THE EXPRESS WRITTEN PERMISSION OF CITRIX

SYSTEMS, INC.

ALTHOUGH THE MATERIAL PRESENTED IN THIS DOCUMENT IS BELIEVED TO BE AC-

CURATE, IT IS PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IM-

PLIED. USERS MUST TAKE ALL RESPONSIBILITY FOR THE USE OR APPLICATION OF

THE PRODUCT(S) DESCRIBED IN THIS MANUAL.

CITRIX SYSTEMS, INC. OR ITS SUPPLIERS DO NOT ASSUME ANY LIABILITY THAT

MAY OCCUR DUE TO THE USE OR APPLICATION OF THE PRODUCT(S) DESCRIBED IN

THIS DOCUMENT. INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITH-

OUT NOTICE. COMPANIES, NAMES, AND DATA USED IN EXAMPLES ARE FICTITIOUS

UNLESS OTHERWISE NOTED.

The following information is for FCC compliance of Class A devices: This equipment has been test-

ed and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio-frequency energy and, if not installed and used in accordance with the instruction man-

ual, may cause harmful interference to radio communications. Operation of this equipment in a res-

idential area is likely to cause harmful interference, in which case users will be required to correct

the interference at their own expense.

Modifying the equipment without Citrix' written authorization may result in the equipment no longer

complying with FCC requirements for Class A digital devices. In that event, your right to use the

equipment may be limited by FCC regulations, and you may be required to correct any interference

to radio or television communications at your own expense.

You can determine whether your equipment is causing interference by turning it off. If the interfer-

ence stops, it was probably caused by the NetScaler Request Switch™ 9000 Series equipment. If the

NetScaler equipment causes interference, try to correct the interference by using one or more of the

following measures:

Move the NetScaler equipment to one side or the other of your equipment.

Move the NetScaler equipment farther away from your equipment.

Plug the NetScaler equipment into an outlet on a different circuit from your equipment. (Make sure

the NetScaler equipment and your equipment are on circuits controlled by different circuit breakers

or fuses.)

Modifications to this product not authorized by Citrix Systems, Inc., could void the FCC approval

and negate your authority to operate the product.