Carrier Access Axxius 800 user manual Delete router-wan gre network, Delete router-wan nat bypass

CLI Commands

delete

delete (router-wan) gre network

Use the delete (router-wan) gre network command to delete a "by network" GRE tunnel to a WAN.

Syntax: delete {rtr_card-addr} {"wan-name"} gre network {ip-addr maskip-addr/bits}

Example: delete 3 "LosAngeles" gre network 10.0.0.0/8

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{"wan-name"}

The WAN interface to modify. The name must be enclosed in quotes.

{ip-addr maskip-addr/bits}

ip-addr mask	The IP address and the subnet mask of the IP network to tunnel, each
	in the form of xxx.xxx.xxx.xxx, where xxx is between 0-255.
ip-addr	The IP Address of the IP network to tunnel, in the form of
	xxx.xxx.xxx.xxx, where xxx is between 0-255.
bits	The subnet mask, specified as the number of ones bits in the mask
	value. Range is between 1-32.

delete (router-wan) nat bypass

Use the delete (router-wan) nat bypass command to delete an IP subnet or host from the list of the source addresses that will not be subject to NAT Translation when passing through a NAT enabled WAN interface.

Syntax: delete {rtr_card-addr} {"wan-name"} nat bypass {ip-addr}

Example: delete 1 "RemoteUnit" nat bypass 156.65.0.0

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{"wan-name"}

The WAN interface to modify. The name must be enclosed in quotes.

{ip-addr}

IP address or host to delete, in the form of xxx.xxx.xxx.xxx, where xxx is between 0-255.

5-54 Axxius 800 - Release 2.2