![](/images/new-backgrounds/1110468/110468445x1.webp)
CLI Commands
set
set (router) port tbos map display
Use the set (router) port tbos map display command to set a TBOS (Telemetry Byte Oriented Serial) display map value for one of the eight TBOS display available for monitoring equipment. This setting can be issued when the card is physically strapped for Ethernet, but has no effect. This setting can be done for any application type but is only used when type is set to TBOS.
Note: this command is only available on a TSR card that has TBOS feature enabled.
Syntax: set
Example: set 5 port 2 tbos map 4 display lynx_ds3
{map-addr}
One of the eight TBOS displays available for monitoring equipment. Range is 1 - 8.
{devicenone}
alcatel_mdr_4000 | Alcatel | |
|
| monitoring |
|
|
|
| lynx_1_4_port_prot_sw | Proxium Lynx radio |
|
|
|
| lynx_8_port_prot_sw | Proxium Lynx radio |
|
|
|
| lynx_ds3 | Proxium Lynx radio |
|
|
|
| lynx_hd_31145_10 | Proxium Lynx radio |
|
|
|
| lynx_hd_31145_1f | Proxium Lynx radio |
|
|
|
none | None will disable monitoring | for that TBOS display. |
|
|
|
|
|
|
|
Axxius 800 - Release 2.2 |