Carrier Access Axxius 800 Show router-lan static ip network, Show router-lan static ipx network

CLI Commands

show

show (router-lan) static ip network

The show (router-lan) static ip network command displays the current list of static IP network entries for the LAN on the specified Router card.

Syntax: show {rtr_lan-addr} static ip network

Example: show 5:1 static ip network

SLOT 5:

Static IP Network Settings for Adit50:

Network	Subnet Mask	Metric	Next Gateway
100.0.0.0	255.0.0.0	1	192.136.43.52
Total: 1

{rtr_lan-addr}

The Router address is in the form {slot:port} or {slot "profile-name"}.

slot	The slot number (1-8) that contains the Router card.
port	Port number of the Router.
"profile-name"	The profile name for the Router interface. Name must be enclosed
	in quotes, with a maximum length of 11 characters.

show (router-lan) static ipx network

The show (router-lan) static ipx network command displays the current list of static IPX network entries for the LAN on the specified Router card.

Syntax: show {rtr_lan-addr} static ipx network

Example: show 5:1 static ipx network

>show 5:1 static ipx network SLOT 5:

Static IPX Network Settings for Axxius50: Total: 0

{rtr_lan-addr}

The Router address is in the form {slot:port} or {slot "profile-name"}.

slot	The slot number (1-8) that contains the Router card.
port	Port number of the Router.
"profile-name"	The profile name for the TSR interface. Name must be enclosed in
	quotes, with a maximum length of 11 characters.

Axxius 800 - Release 2.2 5-209