Carrier Access Axxius 800 user manual Set Up Security, Set Up IP Addresses for Telnet CLI

Configuration

Basic System Setup

Set Up Security

Use the following commands to set up the security on the Axxius 800.

Command		Description
set	user {"user-name"}	Specify the user name and the security level.
level {1-3}		See set user command for details.
set	user {"user-name"}	Set a password for the user. See set user
password		command for details.

Set Up IP Addresses for Telnet CLI

Use the following commands to setup Telnet addresses for Command Line Interface (CLI).

Command	Description
set ethernet ip address	Set the Ethernet IP address, in the
{ip-addr} {mask}	conventional IP address format. See the set
	ethernet ip address command for more
	details.
set ip gateway {ip-addr}	Set the IP gateway, in the conventional IP
	address format. See the set ip gateway
	command for more details.

Upgrade the Axxius 800 Software

Use the following commands to determine the Controller software level, then upgrade the software to the latest version.

Command	Description
status equipment	Determine the software level. See the status
	equipment command for more information.
load tftp {ip-addr} {"file-	Load the new software to the Axxius 800.
name"} (or load xmodem)	See the load tftp and load xmodem
	command for more information.

Axxius 800 - Release 2.2 4-5