ZyXEL Communications 641 manual Novell IPX Ethernet Setup Fields

Prestige 641 ADSL Internet Access Router

6.3IPX Ethernet Setup

From Menu 3 - Ethernet Setup, enter 3 to go to Menu 3.3 - Novell IPX Ethernet Setup as shown in the figure below.

Menu 3.3 - Novell IPX Ethernet Setup

Seed Router= No

Frame Type 802.2= Yes

IPX Network #= N/A

Frame Type 802.3= No

IPX Network #= N/A

Frame Type Ethernet II= No

IPX Network #= N/A

Frame Type SNAP= No

IPX Network #= N/A

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup

The following table describes the Novell IPX Ethernet Setup Menu.

Table 6-1 Novell IPX Ethernet Setup Fields

Field	Description	Options
Seed Router	Determine if your Prestige 641 is to act as a seed	Yes/No
	router.
Frame Type	Enable/Disable the individual frame type.	802.2
	Remember to enable only the ones that are actually	802.3
	used on your network.
		Ethernet II
		SNAP
IPX Network	If your Prestige 641 is a seed router, enter a unique
#	network number for each frame type enabled.

Press [Enter] at the message [Press ENTER to Confirm ...] to save your configuration, or press [Esc] at any time to cancel.

6-4 IPX Configuration