Prestige 641 ADSL Internet Access Router
Step 2. From this menu, enter 4 to open Menu 24.4 - System Maintenance - Diagnostic.
The following table describes the diagnostic tests available in Menu 24.4 for your Prestige and the connections.
| Table |
|
|
Field | Description |
|
|
Reset ADSL | This command |
|
|
Ping Host | This diagnostic test pings the host, which determines the functionality of the |
| TCP/IP protocol on both systems and the links in between. |
|
|
Reboot System | This option reboots the Prestige. |
|
|
Command Mode | This option allows you to enter the command mode. This mode allows you to |
| diagnose and test your Prestige using a specified set of commands. |
|
|
10.4 Backup Configuration
Option 5 in Menu 24 - System Maintenance allows you to backupthe current Prestige configuration to your workstation. Backup is highly recommended once your Prestige is functioning properly.
You must perform the backup and restore through the console port. Any serial communications program should work fine; however, you must use XMODEM protocol to perform the download/upload.
Please note that terms “download” and “upload” are relative to the workstation. Download means to transfer from another machine to the workstation, while upload means from your workstation to another machine.
10.5 Restore Configuration
Selecting option 6 from Menu 24 - System Maintenance to restore the configuration from your workstation to the Prestige. Again, you must use the console port and XMODEM protocol to restore the configuration.
Keep in mind that the configuration is stored in the flash ROM in the Prestige, so even if power failure should occur, your configuration is safe.
10.6 Firmware Update
Menu 24.7
System Maintenance |
