Prestige 641 ADSL Internet Access Router
Menu 3 - Ethernet Setup
1.General Setup
2.TCP/IP and DHCP Setup
3.Novell IPX Setup
4.Bridge Setup
Figure 2-11 Menu 3 - Ethernet Setup
2.11.1 General Ethernet Setup
This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, reduce traffic and prevent security breaches.
Menu 3.1 - General Ethernet Setup
Input Filter Sets: protocol filters= device filters= Output Filter Sets: protocol filters= device filters=
Press ENTER to Confirm or ESC to Cancel:
Figure 2-12 Menu 3.1 - General Ethernet Setup
If you need to define filters, please read the Filter Set Configuration chapter first, then return to this menu to define the filter sets.
2.12 Protocol Dependent Ethernet Setup
Depending on the protocols for your applications, you need to configure the respective Ethernet Setup, as outlined below.
•For TCP/IP Ethernet setup refer to Chapter 3 - Internet Access Application.
•For Novell IPX Ethernet setup refer to Section 6.3 - IPX Ethernet Setup in Chapter 6 - IPX Configuration.
•For bridging Ethernet setup refer to Chapter 7 - Bridging Setup.
Hardware Installation & Setup | |
|
