ZyXEL Communications 641 manual System Status, Menu 24.1 System Maintenance Status

Prestige 641 ADSL Internet Access Router

10.1 System Status

The first selection, System Status, gives you information on the status and statistics of the ports, as shown below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you information on your ADSL line status, number of packets sent and received.

To get to the System Status, enter number 24 to go to Menu 24 - System Maintenance. From this menu, select number 1, System Status. There are five commands in Menu 24.1 - System Maintenance - Status. Entering 1 resets the counters and ESC takes you back to the previous screen.

The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It should be noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.

		Menu 24.1 -- System Maintenance – Status
Node-Lnk	Status	TxPkts	RxPkts	Errors	Tx B/s	Rx B/s	Up Time
1	Up	1462	1567	0	222	211	2:15:16
2	N/A	0	0	0	0	0	0:00:00
3	N/A	0	0	0	0	0	0:00:00
4	N/A	0	0	0	0	0	0:00:00
5	N/A	0	0	0	0	0	0:00:00
6	N/A	0	0	0	0	0	0:00:00
7	N/A	0	0	0	0	0	0:00:00
8	N/A	0	0	0	0	0	0:00:00
9	N/A	0	0	0	0	0	0:00:00
10	N/A	0	0	0	0	0	0:00:00
11	N/A	0	0	0	0	0	0:00:00
12	N/A	0	0	0	0	0	0:00:00

Ethernet:		WAN:
Status: 100M/Full Duplex	Tx Pkts: 0	Line Status: Up
Collisions: 0	Rx Pkts: 0	Upstream Speed: 608 kbps
		Downstream Speed: 4000 kbps
CPU Load = 4.25%
	Press Command:
CMDS: 1-Reset Counters		ESC-Exit

Figure 10-2 Menu 24.1 - System Maintenance – Status

The following table describes the fields present in Menu 24.1 - System Maintenance - Status.

10-2 System Maintenance