Prestige 641 ADSL Internet Access Router
Enter Menu Selection Number: 8
Copyright (c) 1994 - 1999 ZyXEL Communications Corp.
ras> ? |
|
|
|
Valid commands are: |
|
| |
sys | exit | device | ether |
wan | ip | ppp | bridge |
ipx | hdap |
|
|
Figure 10-12 Command mode
10.8 Boot module commands
Prestige boot module commands with accompanying explanations are shown in the following table. For ATBAx, x denotes the number preceding the colon to give the console port speed following the colon in the list of numbers that follows; e.g. ATBA3 will give a console port speed of 9.6 Kbps. ATSE displays the seed that is used to generate a password to turn on the debug flag in the firmware. The ATSH command shows product related information such as boot module version, vendor name, product model, RAS code revision, etc.
======= Debug Command Listing =======
AT | just answer OK |
ATHE | print help |
ATBAx | change baudrate. 1:38.4k, 2:19.2k, 3:9.6k 4:57.6k 5:115.2k |
ATENx,(y) | set BootExtension Debug Flag (y=password) |
ATENx,(y) | set BootExtension Debug Flag (y=password) |
ATSE | show the seed of password generator |
ATTI(h,m,s) | change system time to hour:min:sec or show current time |
ATDA(w,y,m,d) change system date to week year/month/day or show current date
ATDS | dump RAS stack | |
ATDT | dump Boot Module Common Area | |
ATDUx,y | dump memory | contents from address x for length y |
ATRBx | display the | |
ATRWx | display the | |
ATRLx | display the | |
ATGO(x) | run program | at addr x or boot ZyNOS |
ATGR | boot ZyNOS |
|
ATGT | run Hardware Test Program | |
ATRTw,x,y(,z) RAM test | level w, | from address x to y (z iterations) | ||||
ATSH | dump manufacturer | related data in ROM | ||||
ATDOx,y | download | from address x for length y to PC via XMODEM | ||||
ATUR | upload | RAS | code to flash | ROM | ||
ATUR3 | upload | RAS | configuration | file | ||
Figure 10-13 Boot module commands
System Maintenance |
