ZyXEL Communications 641 manual Navigating the SMT Interface, Main Menu Commands

Prestige 641 ADSL Internet Access Router

2.7Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.

Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.

Table 2-2 Main Menu Commands

Operation	Press/<read>	Description
Move forward to	[Enter]	To move forward to a sub-menu, type in the number of the
another menu		desired sub-menu and press [Enter].
Move backward to	[Esc]	Press the [Esc] key to move back to the previous menu.
a previous menu
Move to a	Press the [Space	Fields beginning with “Edit” have a default setting ofNo. Press
submenu	bar] to change No	the [Space bar] to change No to Yes, then press [ENTER] to go
	to Yes then press	to a submenu.
	[ENTER].
Move the cursor	[Enter] or	Within a menu, press [Enter] to move to the next field. You can
		also use the [Up]/[Down] arrow keys to move to the previous and
	[Up]/[Down] arrow
		the next field, respectively.
	keys
Enter information	Fill in, or	You need to fill in two types of fields. The first requires you to
	Press the [Space	type in the appropriate information. The second allows you to
		cycle through the available choices by pressing the [Space] bar.
	bar] to toggle
Required fields	<? >	All fields with the symbol <?> must be filled in order be able to
		save the new configuration.
N/A fields	<N/A>	Some of the fields in the SMT will show a <N/A>. This symbol
		refers to an option that is Not Applicable.
Save your	[Enter]	Save your configuration by pressing [Enter] at the message
		[Press ENTER to confirm or ESC to cancel]. Saving the data on
configuration
		the screen will take you, in most cases to the previous menu.
Exit the SMT	Type 99, then	Type 99 at the Main Menu prompt and press [Enter] to exit the
	press [Enter].	SMT interface.

2-6 Hardware Installation & Setup