Prestige 641 ADSL Internet Access Router
The following table contains the instructions on how to configure the Edit IP Static Route Menu.
| Table |
|
|
Field | Description |
|
|
Server Name | In this field, enter the name of the server. This must be the exact name |
| configured in the NetWare server. |
|
|
Network # | This field contains the internal network number of the remote server that |
| you wish to access. [00000000] or [FFFFFFFF] are reserved. |
|
|
Node # | This field contains the address of the node on which the server resides. If |
| you are using a Novell IPX implementation, this value is [000000000001]. |
|
|
Socket # | This field contains the socket number on which the server will receive |
| service requests. The default for this field is hex [0451]. |
|
|
Type # | This field identifies the type of service the server provides. The default for |
| this field is hex [0004]. |
|
|
Gateway Node | In this field, enter the number of the remote node that is the gateway for |
| this static route. |
|
|
Hop Count and | These two fields have the same meaning as those in the Ethernet setup. |
Tick Count |
|
|
|
Once you have completed filling in the menu, press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] to cancel to cancel.
IPX Configuration |
