Prestige 641 ADSL Internet Access Router
Chapter 2
Hardware Installation & Initial Setup
This chapter describes the physical features of the
Prestige and how to make the cable connections.
2.1Front Panel LEDs OF P641
The LED indicators on the front panel indicate the operational status of the Prestige 641. The table below the diagram describes the LED functions:
ZyXEL
PRESTIGE
600 SERIES
LAN
PWR | SYS | 10M | 100M | ADSL |
| Figure |
| Table |
|
|
PWR | The PWR (power) LED is on when power is applied to the Prestige. |
|
|
SYS | A steady on SYS (system) LED indicates the Prestige is on and functioning properly |
| while an off SYS LED indicates the system is not ready or a malfunction. The |
| system is rebooting when the SYS LED is blinking. |
|
|
LAN 10M | A steady green light indicates a 10Mb Ethernet connection. The LED blinks when |
| data is being sent/received. |
|
|
LAN 100M | A steady orange light indicates a 100Mb Ethernet connection. The LED will blink |
| when data is being sent/received. |
|
|
ADSL | The ADSL LED is on when the Prestige is connected successfully to a DSLAM. The |
| LED blinks when data is being sent/received. The LED is off when the link is down. |
|
|
2.2Prestige 641 Rear Panel and Connections
The following figure shows the rear panel connectors of your Prestige.
Hardware Installation & Setup | |
|
