Prestige 641 ADSL Internet Access Router
Chapter 9
SNMP Configuration
This chapter discusses SNMP (Simple Network Management Protocol) for network management and monitoring.
9.1About SNMP
Your Prestige 641 supports SNMP agent functionality, which allows a manager station to manage and monitor the Prestige through the network. Keep in mind that SNMP is only available if TCP/IP is configured on your Prestige.
9.2Configuring SNMP
To configure SNMP, select SNMP Configuration (enter 22) from the Main Menu to open Menu 22 - SNMP Configuration, as shown in the figure below. The “community” for Get, Set and Trap fields is simply SNMP’s terminology for password.
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Figure 9-1 Menu 22 - SNMP Configuration
SNMP Configuration |
